[NLD] TS10 MAO V2, First Impressions

https://preview.redd.it/6p6hsl0jocud1.jpg?width=1440&format=pjpg&auto=webp&s=461e77ba0191fb8181442be17d3f7584b0416d1a

Super happy w the Tint and 50% FET firmware 0000-2024-04-20.

The MAO finish is Very nice, it is matte and uniform.

Arrived in Advanced mode with bright red Aux, I did a factory reset.

Light defaults to Simple Mode in Smooth Ramping

Battery check reports one time, blinks white LEDs, then stops.

Aux on Low, in Voltage Color Display

Light turns on at 8 lumens

floor 0.1 lumens

ceiling 429 lumens

Post Off Voltage Display for 4 seconds

Smooth Steps enabled

Blinkies enabled

Advanced Mode

triple clic gives repeating battery voltage using white LED color mix

Default Aux are on Low in Voltage Color Display

turns on at 8 lumens

Smooth Steps enabled

Post Off Voltage Aux for 4 seconds after turning Off the main LEDs

Double clic from On is 640 lumens Turbo

Double clic from Off is 429 lumens ceiling

0.01 floor in smooth ramping mode

0.1 floor in stepped ramping mode

7 steps in Stepped Ramping

Step 5 is 98 lumens, no PWM, top of regulated output

Lockout Aux set to Blink Voltage color

Tactical gives 335 lumens and the aux blink Voltage color (mirrors the setting for Lockout)

Changes I made to options:

Disabled Turbo

Set battery blinks to Red

Set Stepped Ramping to 12 steps

Set Smooth Ramping to slower (option 2)

Changed Lockout Aux to off.

Im Very happy w the New MAO TS10 V2. Recommended!