She runs !

She fuckin BOOGIES!! s&s super stock billet short block with stock bore for 80 inch evo. performance charging system, ev59 cam, s&s oil pump, Only things I used off the old bike was pushrod tubes/nose cone/front wheel, and the jugs, jugs were milled top and bottom .005 and cylinders bored over .020. wiseco forged flat top pistons with big valve cuts for the screamin eagle heads, the heads were milled .040, valves sunk .060 for the bigger cam, port and polished the intake and exhaust ports. With all the machine work combined with my head gasket I have about 10.5:1 compression, new rocker boxes with s&s rocker arm shafts and Jim’s roller rockers. S&s tappet blocks. Jim’s big axles power glide lifters. Andrews chromoly adjustable push rods. thunder jet machined into the carb. Screamin eagle control module. Made the exhaust myself. Chain drive with a 21/51 sprocket set up. And a Jim’s 6speed trans. That’s just the fun stuff

Hardtailed by 47industries. Seat by Mikeyseats. Paint by lowkey_arty. Pin striping by Ryzart. Chromed by NBP_finishing